E25BMHS/L

25 HP Outboard Motor comes standard with Manual Starter, Tiller Handle, Side Shift Lever, Engine Stop Switch Lanyard, Alternator, Manual Trim and Tilt and Shallow Water Drive (1-Step). Accessories also include Propeller, 24L Plastic Fuel Tank, Emergency Starter Rope and Owners Manual. Optional accessories include Toolkit and Spare Spark Plugs (These however are market dependent).

Features and Specifications

Pilot Water Hole (overheat warning)
Loop Charging (2 stroke tuning for high performance and fuel economy)
Thermostatic Cooling Control
Long-Life Piston / Piston Rings
Maintenance-Free CDI (for high performance, reliability and a sure start)
Engine Stop Switch Lanyard
Alternator
Throttle Friction
Energy Advisor Mark
Steering Friction Adjustment
Shallow Water Drive
Large Capacity Water Pump
Sturdy Gears and Gear Case
Over-Rev Limiter
Overheat Warning
Start-In-Gear Prevention
Neutral Throttle Limiter (optional)
Special Aluminum Alloy: YDC-30 (corrosion prevention)
5-Stage Multiple Coating (corrosion prevention)
Self Sacrificing Anodes (corrosion prevention)

Engine Type – 2 Cylinder
Displacement - 496 cm3
Bore x Stroke – 72 x 61 mm
Compression Ratio – 6.2 : 1
Max Prop Shaft Output – 18.4kW (25ps) / 25 HP @ 5000 RPM
Max RPM Range – 4000 ~ 5500 RPM
Fuel Induction System – Single Carburetor
Lubrication – Pre-Mixing
Oil Ratio Fuel Mixture – 100 : 1
Max Fuel Consumption – 10.7 L/h
Ignition System – CDI
Prop Engagement – Spline
* Transom Height S – 423 mm (16.7 in)
* Transom Height L – 550 mm (21.7 in)
Dry Weight S * - 52 kg
Dry Weight L * – 55 kg

* : With aluminum prop

* S – Short Shaft / Foot
* L – Long Shaft / Foot