E40XMHS/L

The Enduro Gasoline Series 40 HP Outboard Motor comes standard with Manual Starter, Tiller Handle, Front Shift Lever, Engine Stop Switch Lanyard and Manual Trim and Tilt. Accessories also include  Propeller, 24L Plastic Fuel Tank, Toolkit, Emergency Starter Rope, Spare Spark Plugs and Owners Manual. Optional accessories include Alternator, Shallow Water Drive (2-Step) and Repair Kit (These however are market dependent).

Features and Specifications

Pilot Water Hole (overheat warning)
Manual Starter
Loop Charging (2 stroke tuning for high performance and fuel economy)
Thermostatic Cooling Control
Extremely Durable Crankshaft
Long-Life Piston / Piston Rings
Maintenance-Free CDI (for high performance, reliability and a sure start)
Front Shift
Engine Stop Switch Lanyard
Alternator (optional)
Throttle Friction
Wide Range PTT (for convenience and high performance)
Integrated Hour Meter
Single Unit PTT
Long-span Mounting System (for low transmission of vibration)
Labyrinth Exhaust System (for noise reduction)
Sub Water Inlet
Large Capacity Water Pump
Hard-Chrome-Plated Water Pump
Sturdy Gears and Gear Case
Over-Rev Limiter
Overheat Warning
Start-In-Gear Prevention
Special Aluminum Alloy: YDC 30 (corrosion protection)
5-Stage Multiple Coating (corrosion protection)
Self-Sacrificing Anodes (corrosion protection)

Engine Type – 2 Cylinder
Displacement - 703 cm3
Bore x Stroke – 80 x 70 mm
Compression Ratio – 6.0 : 1
Max Prop Shaft Output - 29.4kW (40ps) / 40 HP @ 5000 RPM
Max RPM Range – 4000 ~ 5500 RPM
Fuel Induction System – Single Carburetor
Lubrication – Pre-Mixing
Oil Ratio Fuel Mixture – 50 : 1
Max Fuel Consumption – 20 L/h
Ignition System – CDI
Prop Engagement – Spline
* Transom Height S – 424 mm (16.7 in)
* Transom Height L – 551 mm (21.7 in)
Dry Weight S * - 72 kg
Dry Weight L * – 81.1 kg

* : With aluminum prop

* S – Short Shaft / Foot
* L – Long Shaft / Foot