F75CEHDL

This is the 4-Stroke 75 HP Long Shaft Outboard Motor. The F75C series outboards are more resistant to corrosion and abrasion. Come standard with Electric Starter, Engine Stop Switch Lanyard, Alternator, Built-In Hour Meter, Hydro Trim and Tilt, and Shallow Water Drive. Accessories include Owner’s Manual and Emergency Starter Rope. Optional accessories include Stainless Steel Propeller, Spark Plug, Oil Filter and Tool Kit (These however are market dependent).

Features and Specifications

ECM Micro-Computer Control (Reliability)
Single Throttle Body / Long Intake (High Performance)
Vapor Burning System
Anti-Abrasion Piston Rings
Water Sealed Outer Wall (Quietness)
Multi-Function Large Tiller Handle
16-Valve DOHC Direct Action (High Power and Torque, Economy)
Multi-Point Fuel Injection (High Performance, Fuel Efficiency, Cleanness)
Prime Start (Sure Start)
Blow-By Gas Reburning System
Large Water Separator with Water Sensor
Fail Safe
YDIS: Yamaha Diagnostic System (Serviceability)
Hydro Trim and Tilt with Shallow Water Drive
Built-In Hour Meter
Labyrinth Exhaust System
Anti-Corrosion Exhaust System
Freshwater Flushing Device
Long-Span Mounting System
Hard-Chrome Plated Water Pump (Durability)
Warning and Protection (Reliability and Convenience)
Yamaha Ideal Anti-Corrosion System (Durability)

Engine Type – 16-Valve, DOHC, Direct Action, In-Line 4
Displacement - 1596 cm3
Bore x Stroke – 79 x 81.4 mm
Compression Ratio – 8.9 : 1
Max Prop Shaft Output – 55.2 kW (75ps) / 75 HP @ 5500 RPM
Max RPM Range – 5000 ~ 6000 RPM
Fuel Induction System – Electronic Fuel Injection
Lubrication – Wet Sump
Engine Oil Capacity – 3.7 L (without filter)
Max Fuel Consumption – 28.7 L/h @ 5500 RPM
Ignition System – TDI Micro-Computer
Prop Engagement – Spline
Transom Height – L: 516 mm (20.3 in)
Dry Weight * - 175 kg

* : With aluminum prop